ftp folder issue

Discussion of application development using iX Developer, including but not limited to getting started, using the functions tab, properties, objects and installation.
Post Reply
AMitchneck
Posts: 137
Joined: Mon Jun 11, 2012 2:10 pm

ftp folder issue

Post by AMitchneck »

I have the same program running on two T7A panels. One panel has firmware version 6.0.73 and the other has 6.0.365. The program is designed to write diagnostic information from our controller into the ftp folder "\FlashDrive\Project\Project Files\". This works on the .73 panel, but for some reason the ftp folder on the .365 remains blank (although I can upload files to it over ftp).

Was the ftp folder location changed between firmwares?

On another note, how do I update the firmware so the two panels have the same version?

Thanks.
Adam M.
Controls Engineer
FlexEnergy

User avatar
Ron L.
Posts: 214
Joined: Fri Jul 15, 2011 3:21 pm

Re: ftp folder issue

Post by Ron L. »

What version of iX Developer are you using?
Best Regards,

Beijer Electronics, Inc.
Ron Lloyd | Applications Engineer

AMitchneck
Posts: 137
Joined: Mon Jun 11, 2012 2:10 pm

Re: ftp folder issue

Post by AMitchneck »

iX 2.0.463.0
Adam M.
Controls Engineer
FlexEnergy

Post Reply