Switch COM port from RS232 to RS422 programatically.

Discussion of application development using iX Developer, including but not limited to getting started, using the functions tab, properties, objects and installation.
Post Reply
Ya-hoo
Posts: 4
Joined: Fri Jan 16, 2015 12:00 pm

Switch COM port from RS232 to RS422 programatically.

Post by Ya-hoo »

I am using QTERM A7, I need to switch the COM1 port, which can be used as RS232/RS422/RS485, from RS232 to RS422 programmatically or vice versa.

Is there a way to do it?

Thanks,

User avatar
Jae V
Posts: 118
Joined: Wed Jan 15, 2020 11:00 am

Re: Switch COM port from RS232 to RS422 programatically.

Post by Jae V »

Hello,
We understand that this is a very old post. You can set the COM ports in iX Developer to be RS232/RS422/RS485 under the System/Serial Ports and then just choose the serial port you want to adjust. If there is anyone who is still experiencing this or similar issues and require assistance, please visit us at https://www.beijerelectronics.us/en-US/ ... ___support or give us call at 801.708.6690. Thank you.
Best regards,
Jason
(801) 708-6690
Technical Support
Contact Us



Beijer Electronics AB
http://www.beijerelectronics.us

Post Reply