Beijer Electronic Opc Server 1.2 demo problem

Discussion of application development using iX Developer, including but not limited to getting started, using the functions tab, properties, objects and installation.
Post Reply
gurkan346346
Posts: 1
Joined: Tue Jun 21, 2016 10:34 am

Beijer Electronic Opc Server 1.2 demo problem

Post by gurkan346346 »

Hello there. Beijer Electronic OPC server 1.2 program would transfer the data to the WinCC SCADA software on my computer. OPC server program is limited because it is closing after 30 minutes. 4000 tags have usb dongle. We did not solve the problem despite this demo. Do you have a friend who can help me in this regard. Thanks

User avatar
Jae V
Posts: 118
Joined: Wed Jan 15, 2020 11:00 am

Re: Beijer Electronic Opc Server 1.2 demo problem

Post by Jae V »

Hello,
We understand that this is a very old post. We would have the best success seeing with helping you solve this by seeing your project or talking over the phone. If there is anyone who is still experiencing this or similar issues and require assistance, please visit us at https://www.beijerelectronics.us/en-US/ ... ___support or give us call at 801.708.6690. Thank you.
Best regards,
Jason
(801) 708-6690
Technical Support
Contact Us



Beijer Electronics AB
http://www.beijerelectronics.us

Post Reply