Page 1 of 1

IP Configuration

Posted: Tue Aug 14, 2012 1:06 pm
by daoa80
I would like to change my IP configuration manually after my application is transferred to my QTERM-A12 panel?

1. Can this be done?
2. Is there any documentation on that?
3. I do not want to set it up on the panel before transferring the application, I want to create an app to do it and change it while application running.

Any advices?

Thanks

Re: IP Configuration

Posted: Tue Aug 14, 2012 1:15 pm
by mark.monroe
There is an action called "Show IP settings" under "Other" actions. You can associate the "Show IP settings" action with a button. After you download your project to the terminal, you can then set the IP address using that action.

If you transfer your project via a USB stick, then you do not need to assign the panel a IP address. The Panel comes with a default IP address. If that address works for your network, you can transfer the project to the unit without first changing the IP address.

Re: IP Configuration

Posted: Tue Aug 14, 2012 1:58 pm
by daoa80
1. if you change the IP address, does it change immediately r you are required to restart it?

2. how does it handle conflict if somebody assigns an address that already exists on the network?

Re: IP Configuration

Posted: Wed Aug 15, 2012 7:48 am
by mark.monroe
You do not need to reboot to change the IP address. The Unit handles IP conflicts like all computers do. The IP stack is the Microsoft CE 6.0 stack.