Page 1 of 1

iX Developer Windows 10 Issues

Posted: Wed Feb 05, 2020 11:53 am
by turnerpeterk
I have two issues with a new iX developer 2.40 installation -

Sometimes the iX Developer window won't display. The program is running and showing in the windows task bar, but the actual program window is gone. I can't alt-tab to it, can't maximize it, it's just gone. Workaround is to start a new project, and then file-open the old project. This usually works.

Second issue - when running or simulating the project on my computer, the simulated project window isn't big enough and doesn't display the entire HMI window - just the upper-left corner of it.

Has anyone had these issues?

Re: iX Developer Windows 10 Issues

Posted: Wed Feb 05, 2020 3:21 pm
by Jae V
Hello TurnerPeterk,

So I don't have a good answer for the first issue. Our company runs iX developer on Windows 10 exclusively and haven't experienced this issue. I would try re-downloading iX developer as you could have a bad install. If you are still having issues, check with your IT department if they have any know restrictions on pop-ups.

As for the second issue, this is most likely due to your dpi setting. To fix this, Display properties and scroll down the page to the "Scale and Layout" section and change the "size of text, apps, and other items" to 100%. Then log out of your current user and re log back in and it should be fixed.

Re: iX Developer Windows 10 Issues

Posted: Fri Feb 07, 2020 11:47 am
by turnerpeterk
Thanks Jason, that was it. The first issue also seems to be resolved, so perhaps the same cause - thank you!

Re: iX Developer Windows 10 Issues

Posted: Thu Feb 13, 2020 5:34 pm
by Jae V
No Problem! Let us know if you need any additional support.