Need a help

Discussion of configuring and troubleshooting communication to PLC's or other devices using iX Developer.
Post Reply
Posts: 1
Joined: Sat Aug 03, 2019 12:56 pm

Need a help

Post by MaxP »


So is it possible to start the touch calibrating on a T7B over a cmd in windows CE?


User avatar
Russ C.
Posts: 201
Joined: Thu Nov 16, 2017 3:32 pm

Re: Need a help

Post by Russ C. »

No, touch calibrate can only be started from the service menu.
Best regards,

(801) 708-6690
Technical Support
Contact Us

Beijer Electronics AB

Post Reply