Two iX panels connecte to one PLC

[KAG]

Hello everyone

I have a "x2 pro 15" panel which is connected to a Siemens S7-300 PLC (S7IsoTcp). Additionally I need a secondary "x2 pro 15" panel on which I should be able to have full access (read/write) like to the primary "x2 pro 15" panel.

Is it possible to connect the two "x2 pro 15" panels by ethernet directly to the PLC? And moreover can I lock a panel if there are operations on the other? I need two panels with the same HMI, either operating panel one or panel two, but not both at the same time.

I've seen the topic "Sharing tag values between two iX panels" in this forum. Do I have to make also a "OPC UA server" on the primary panel?

I'm running iX Developer 2.40

Kind regards
Lars

[Jae V]

Hello,
We understand that this is a very old post. This is one of those issues best solved over the phone due to the multiple variables you have going on. If there is anyone who is still experiencing this or similar issues and require assistance, please visit us at https://www.beijerelectronics.us/en-US/ ... ___support or give us call at 801.708.6690. Thank you.