Hello!
What cable (pin assignment) must be used for communication between iX Panel T7A and Siemens S7 CP's by MPI protocol?
Thanks
iX T7A communication cable
Re: iX T7A communication cable
CAB102 Cable for iX Panel T4A/T7A/T10A
Cable length: 3 Meters.
Can be used with following systems:
SIMATIC 300/400 MPI Direct Driver
SIMATIC 200 PPI Driver
SIMATIC 1200 N/A only ethernet use ISO-on-TCP driver.
Cable length: 3 Meters.
Can be used with following systems:
SIMATIC 300/400 MPI Direct Driver
SIMATIC 200 PPI Driver
SIMATIC 1200 N/A only ethernet use ISO-on-TCP driver.
- Attachments
-
- CAB102_3m.zip
- (117.64 KiB) Downloaded 1177 times
Best Regards,
Beijer Electronics, Inc.
Ron Lloyd | Applications Engineer
Beijer Electronics, Inc.
Ron Lloyd | Applications Engineer