iX Talk

Hello,

I'm trying to connect a Schneider Pacdrive 3 via Codesys ARTI to my HMI. But I have problems getting the communication working.

In the vijeo desginer i would add
Equipment address or node name: LMC_PacDrive (192.168.1.155)

TCP/IP config
Gateway IP address: 127.0.0.1
Port:1217

Have any one got any experience with the PacDrive?
Im using SoMachine Motion v4.1

Hello,
We understand that this is a very old post. If there is anyone who is still experiencing this or similar issues and require assistance, please visit us at https://www.beijerelectronics.us/en-US/ ... ___support or give us call at 801.708.6690. Thank you.