Hi, I'm using a Beijer monitor with a SEW PLC. It works ok! In adition, I want to communicate the SEW PLC with a Chiller trought RS485 in Modbus RTU protocol, using the Beijer monitor like a gateway. How can I do to make this kind of communication when I using a SEW EURODRIVE controller?
Thanks!
Modbus RTU communication
Re: Modbus RTU communication
Hello,
We understand that this is a very old post. If there is anyone who is still experiencing this or similar issues and require assistance, please visit us at https://www.beijerelectronics.us/en-US/ ... ___support or give us call at 801.708.6690. Thank you.
We understand that this is a very old post. If there is anyone who is still experiencing this or similar issues and require assistance, please visit us at https://www.beijerelectronics.us/en-US/ ... ___support or give us call at 801.708.6690. Thank you.
Best regards,
Jason
(801) 708-6690
Technical Support
Contact Us
Beijer Electronics AB
http://www.beijerelectronics.us
Jason
(801) 708-6690
Technical Support
Contact Us
Beijer Electronics AB
http://www.beijerelectronics.us