iX Talk

Hi
I have a Wago PFC200 controller with e!COCKPIT (Codesys 3.5)
The issue is that the Wago Modbus driver in IX does not work with e!COCKPIT.
The controller does not respond to eg %mw200.

I tried then to use the Codesys ARTI driver here the IX can't see the controller is online. I have imported the XML file with the Tags.

So now is the only option OPC UA.
And as well here I can't get that to work. I have tested the OPC UA server on the controller with UAExpert here everything is working.
But i cant get it to work from IX to the controller.

I have tried these combinations.

NS2:Application.GlobalList_IO.PSB1SC1H1EFFAI1_AIAlarmLevel_H
NS4:Application.GlobalList_IO.PSB1SC1H1EFFAI1_AIAlarmLevel_H
NS4:WAGO 750-8202 PFC200 CS 2ETH RS /T.Application.GlobalList_IO.PSB1SC3TTAI3_2_AIAlarmLevel_HH

Hope some can help
Jesper

Hello,
We understand that this is a very old post. But for setting up the OPC UA, you do need to set up some settings in iX developer. If there is anyone who is still experiencing this or similar issues and require assistance, please visit us at https://www.beijerelectronics.us/en-US/ ... ___support or give us call at 801.708.6690. Thank you.