Schneider M241 modbus Tcp/ip driver

Discussion of configuring and troubleshooting communication to PLC's or other devices using iX Developer.
Post Reply
MiguelDuke
Posts: 1
Joined: Tue Feb 14, 2017 3:01 am

Schneider M241 modbus Tcp/ip driver

Post by MiguelDuke »

Hello! I need to connect my T7F-2 panel to a schneider M241 througt ethernet port using modbus tcp/ip, the thinkg is that i have allready the connection done without any king of errors but what happens is that i cannot read or wright any kind os variable in tha PLC, i think it could be some kind of driver issue.
P70213-135023.jpg
P70213-135023.jpg (3.99 MiB) Viewed 4679 times
P70207-120535.jpg
P70207-120535.jpg (3.3 MiB) Viewed 4679 times
whating for reply, thank you very much

Miguel

User avatar
Jae V
Posts: 118
Joined: Wed Jan 15, 2020 11:00 am

Re: Schneider M241 modbus Tcp/ip driver

Post by Jae V »

Hello,
We understand that this is a very old post. We would need to look closer at your project to verify your communication settings. If there is anyone who is still experiencing this or similar issues and require assistance, please visit us at https://www.beijerelectronics.us/en-US/ ... ___support or give us call at 801.708.6690. Thank you.
Best regards,
Jason
(801) 708-6690
Technical Support
Contact Us



Beijer Electronics AB
http://www.beijerelectronics.us

Post Reply