Hi All,
I am new to this forum so if anyone can help me out with my problem that would be great help.
i am trying to communicate between E1101 hmi and Q06UDEH PLC AND its giving me constant error as "error IP STN 07".
i am using E designer Version 7.50 build 312 and gxworks2 for plc configuration.
i am uploading all setting which i have done in PLC GX WORKS 2 AND E DESIGNER.
i am kinda stuck at this point if anyone can help me that would be great help for me.
help is much appreciated and Thanks in advnce.
communication error between E1101 HMI and Q06UDEH PLC
-
aminchikhaliya
- Posts: 1
- Joined: Wed Oct 24, 2018 8:29 am
communication error between E1101 HMI and Q06UDEH PLC
- Attachments
-
- 3.png (146.97 KiB) Viewed 4896 times
-
- 2.png (161.62 KiB) Viewed 4896 times
-
- 1.png (49.5 KiB) Viewed 4896 times
Re: communication error between E1101 HMI and Q06UDEH PLC
Hello,
We understand that this is a old post. This would probably be best if we could see the entire program and try it out on our test bench. If there is anyone who is also experiencing this or similar issues and require assistance, please visit us at https://www.beijerelectronics.us/en-US/ ... ___support or give us call at 801.708.6690. Thank you.
We understand that this is a old post. This would probably be best if we could see the entire program and try it out on our test bench. If there is anyone who is also experiencing this or similar issues and require assistance, please visit us at https://www.beijerelectronics.us/en-US/ ... ___support or give us call at 801.708.6690. Thank you.
Best regards,
Jason
(801) 708-6690
Technical Support
Contact Us
Beijer Electronics AB
http://www.beijerelectronics.us
Jason
(801) 708-6690
Technical Support
Contact Us
Beijer Electronics AB
http://www.beijerelectronics.us