Page 1 of 1
Import Control Logix L5K file
Posted: Thu Sep 08, 2011 2:13 am
by SOGT
Hi
Way can i not import like TIMER Structure tags when i import the l5k file in to my tags in the Ix project, all other tags i have created will bee imported just not the other ones.
When i writing them manually in they are working.
Re: Import Control Logix L5K file
Posted: Tue Sep 13, 2011 8:58 am
by Ron L.
Are you using more then 2 levels for the timer structure tag? The software only supports up to 2 levels, this is documented in the manual. If you don't have more then 2 levels, can you send the L5K files so we can research the problem?
Re: Import Control Logix L5K file
Posted: Thu Oct 06, 2011 1:53 am
by SOGT
Hi
In my opinion i only use 2 level, and this is also working if i write it manual in the tag group in ix
z1Main:
hoistSeqStep100_T.PRE
Do you have a mail i can send the l5k file to? or send me a mail on
jbdl@sogt.dk
Re: Import Control Logix L5K file
Posted: Thu Oct 06, 2011 9:38 am
by Tom R.
Hello,
The bottom line here is that this L5K import module is not perfect. We have discussed doing more work to it to make it better but for now this is what we have.
You can also export your tags from RSLogix 5000 to a .CSV file. You can then adjust this file and import it in to iX.
You can send us your L5K file at
support.usa@beijerelectronics.com, and we can look at it to see if we can get different results and also use the file as an example for us to work with to make improvements to the import.