iX Talk

Posted: **Thu Jan 24, 2013 7:13 am**

Hi,

I wanted to ask if it is possible when I log as the VNC client to the panel, so the operator, which is near-panel, will have on screen "momentary remote access is done"

: This will see Operator when I will be connect via VNC to the panel; ThisWillseeOperator.JPG (28.08 KiB) Viewed 7085 times

But to the one who is logged on via VNC , will work normally with panel and can modify some parameters.

: This will see if I will be connected to a VNC; VNCscreen.JPG (33.57 KiB) Viewed 7085 times

JohnCZ

Posted: **Thu Jan 24, 2013 8:48 am**

No, that is not possible. VNC works by mirroring the HMI screen. There is no way to have the VNC show something different than what is on the HMI.

You can use the webserver to do what you want. But you would have to create the webpages by hand. iX Developer does not have any features that help in the creation of those webpages.

Posted: **Thu Jan 24, 2013 1:14 pm**

Ok thanks

iX Talk

VNC for two operators

VNC for two operators

Re: VNC for two operators

Re: VNC for two operators