Hi,sir
With IX Developer. My original HMI develope with C#. I communication to Motion control board with Real time ethernet protocol. The Library made of DCOM. Can i include DCOM(DLL) into IX developer ?
http://www.bausano.net/axesbrain.asp
http://www.bausano.net/negozio/store/co ... oduct=1182
Communication with motion control board
Re: Communication with motion control board
Looking at the documentation here:
http://www.bausano.net/download/axesbra ... ook_gb.pdf
It looks like the software written for that device was targeting Windows 98 and Windows 2000. You might have luck using the DLL's on a Windows XP device, but our panels have Windows Embedded CE 6.0.
https://www.beijerelectronics.com/en/Pr ... ___panels/
We do off some higher end Industrial PC's that can support Windows 10 also.
https://www.beijerelectronics.com/en/Pr ... anel___PCs
http://www.bausano.net/download/axesbra ... ook_gb.pdf
It looks like the software written for that device was targeting Windows 98 and Windows 2000. You might have luck using the DLL's on a Windows XP device, but our panels have Windows Embedded CE 6.0.
https://www.beijerelectronics.com/en/Pr ... ___panels/
We do off some higher end Industrial PC's that can support Windows 10 also.
https://www.beijerelectronics.com/en/Pr ... anel___PCs
Best Regards,
Beijer Electronics, Inc.
Ron Lloyd | Applications Engineer
Beijer Electronics, Inc.
Ron Lloyd | Applications Engineer