How to change screens based off of a Tag value.

[Ron L.]

Create a Tag. The tag can be mapped to to an address on a PLC if that makes more sense for your system. For this example, I'll call the tag, "ScreenTag".

Click on the [...] button under the "Action" column.

tag_action.jpg (82.58 KiB) Viewed 18028 times

Here you can configure the properties of the "ScreenTag" to change screens depending on the value of the tag. For the attached screen shot, if I wanted to change to "Screen1", I would set the "ScreenTag" to be a value of 1.

screen_dynamic_tag_props.jpg (69.67 KiB) Viewed 18028 times

[Chris T.]

Locked