How to change screens based off of a Tag value.
Posted: Thu Sep 22, 2011 11:24 am
Create a Tag. The tag can be mapped to to an address on a PLC if that makes more sense for your system. For this example, I'll call the tag, "ScreenTag".
Click on the [...] button under the "Action" column.
Here you can configure the properties of the "ScreenTag" to change screens depending on the value of the tag. For the attached screen shot, if I wanted to change to "Screen1", I would set the "ScreenTag" to be a value of 1.
Click on the [...] button under the "Action" column.
- tag_action.jpg (82.58 KiB) Viewed 14327 times
- screen_dynamic_tag_props.jpg (69.67 KiB) Viewed 14327 times