How to debug script in an iX Developer project.

Post Reply
User avatar
Ron L.
Posts: 214
Joined: Fri Jul 15, 2011 3:21 pm

How to debug script in an iX Developer project.

Post by Ron L. »

You will need to install Visual Studio 2010 or Visual C# 2010 Express.

iX Developer must be configured to target the correct Visual Studio executable in order for the debugging to work. You can configure the target executable under "iX" -> "Options" -> "Script Debugger options" -> "Debugger".
ix_options.JPG
ix_options.JPG (20.6 KiB) Viewed 15417 times
iX Developer configured for Visual C# 2010 Express.
ix_options2.JPG
ix_options2.JPG (27.43 KiB) Viewed 15417 times
Press the debug button to validate the project and start the external debugger with a generated project file.
debug_button.JPG
debug_button.JPG (29.92 KiB) Viewed 15417 times
If you get a compile error about .NET Framework 4.0 not being installed, you can change the project settings to target the ".NET Framework 3.5" and re-compile.
target_3_5.JPG
target_3_5.JPG (60.24 KiB) Viewed 15417 times
Start debugging. If you get an exception you can try pressing F5 to continue.
pinvoke_exception.JPG
pinvoke_exception.JPG (90.49 KiB) Viewed 15417 times
If you continue getting exceptions and are unable to debug your project, you can change your workspace to a "Panel Type" of PC and debug. You may want to do this after making a copy of your project.
settings_pc.JPG
settings_pc.JPG (58.82 KiB) Viewed 15417 times
Best Regards,

Beijer Electronics, Inc.
Ron Lloyd | Applications Engineer

User avatar
Chris T.
Posts: 109
Joined: Mon Nov 20, 2017 5:29 pm

Re: How to debug script in an iX Developer project.

Post by Chris T. »

Locked
Best regards,
Christopher
(801) 708-6690
Technical Support
Contact Us

Beijer Electronics AB
http://www.beijerelectronics.us

Post Reply