Printers

Any discussion about hardware that supports iX Developer.
Post Reply
wlederer
Posts: 175
Joined: Fri Jan 27, 2012 4:20 am

Printers

Post by wlederer »

Who got success with connecting printers to T7A (or similar) HMI?
Some months ago I tried with HP LaserJet P2055dn (was specially ordered for this job), but could not find solution, neither with USB nor with network. I used iX Developer 1.3. HP experts did not help as well, because: "Windows CE is not supported".
Stories about contemporary (means: their production is not yet discontinued) monochrome laser printers are especially interesting.

Regards, Waldemar

mark.monroe
Posts: 824
Joined: Tue Mar 13, 2012 9:53 am

Re: Printers

Post by mark.monroe »

Sent the printer type to PCLLASERJET, make sure the PCL5c checkbox has been checked and type in the name/path of the printer if it is an Ethernet printer, then it should work.
Snap 2012-10-25 at 08.16.10.jpg
Snap 2012-10-25 at 08.16.10.jpg (40.1 KiB) Viewed 14965 times
Best Regards,
Mark Monroe

Beijer Electronics, Inc. | Applications Engineer

wlederer
Posts: 175
Joined: Fri Jan 27, 2012 4:20 am

Re: Printers

Post by wlederer »

Thank You Mark. I'll try again later.
As far as I know, HP migrated from PCL5 to PCL6 language and printers with default PCL5 are not available anymore. Is it true?
Did Beijer try printers with default PCL6 language?
Did Beijer try printers using any other languages?

Regards, Waldemar

mark.monroe
Posts: 824
Joined: Tue Mar 13, 2012 9:53 am

Re: Printers

Post by mark.monroe »

Each protocol is different and needs to be programmed into the HMI. At some point in the future Beijer may write a print driver that is PCL compatible.
Best Regards,
Mark Monroe

Beijer Electronics, Inc. | Applications Engineer

bsulakoglu
Posts: 2
Joined: Thu Feb 06, 2014 4:27 am

Re: Printers

Post by bsulakoglu »

Hi guys,

I need a list of supported printers on T7E. And i need print reports to a portable printer. Do you thing i have chance to get it somehow?

Thanks a lot. . .

Post Reply