Hi all...
I have aproblem when trying to download the project in to beijer hmi.
The type of hmi is ix t5f-2 ; and the problem is when I trying to download the project in to the panel via Ethernet cable and by using ix devolper software version 2.10 sp2 .the downloading page appear without any Target . And no IP of Target showed .
Thanks for interesting
The list of Targets can't displayed in the downloading page
-
Ibrahimelhedaby
- Posts: 2
- Joined: Thu Sep 07, 2017 3:11 pm
The list of Targets can't displayed in the downloading page
- Attachments
-
- IMG_20170823_152744.jpg (2.57 MiB) Viewed 5799 times
-
Gabriel B.
- Posts: 13
- Joined: Mon Nov 06, 2017 11:19 am
Re: The list of Targets can't displayed in the downloading p
On the splash page of your iX T5f, bottom left hand corner; there should be an IP address displayed. Make sure that IP is different from the PC's IP address.If that doesn't fix the issue. Try typing in the target IP address in the designated field of the download popup screen. Contact Beijer Support if either of those options don't get you the desired result.