Switch COM port from RS232 to RS422 programatically.

[Ya-hoo]

I am using QTERM A7, I need to switch the COM1 port, which can be used as RS232/RS422/RS485, from RS232 to RS422 programmatically or vice versa.

Is there a way to do it?

Thanks,

[Jae V]

Hello,
We understand that this is a very old post. You can set the COM ports in iX Developer to be RS232/RS422/RS485 under the System/Serial Ports and then just choose the serial port you want to adjust. If there is anyone who is still experiencing this or similar issues and require assistance, please visit us at https://www.beijerelectronics.us/en-US/ ... ___support or give us call at 801.708.6690. Thank you.